Overview
This Uwell Caliburn G coils review covers the Uwell Caliburn G replacement coils sold in packs of four, in two mesh resistances: 0.8 ohm for a looser direct-to-lung draw and 1.0 ohm for a tighter mouth-to-lung draw. It is a specification-based review built from our product listing and general vaping knowledge, not from hands-on use or lab measurement, so the figures below are listing figures. The coils are only for the Caliburn G pod system, so the first job is to check that you own that device. After that, the choice is about draw style, power range and how often you are willing to swap a coil. Products used with nicotine are for adults aged 21 and over only, and UAE law may set a higher limit.
Jump to a section:
- Uwell Caliburn G coils review: quick verdict
- Specifications and pack options
- What sets the 0.8 ohm and 1.0 ohm coils apart
- How to pick, fit and prime the right coil
- Compatibility and how it compares with other Uwell coils
- UAE rules and safe use
- Price, delivery and final verdict
Uwell Caliburn G coils review: quick verdict
The pack is simple on paper. You get four single mesh coils, you choose either 0.8 ohm or 1.0 ohm when you order, and they fit the Caliburn G pod with a friction fit. The listing gives a power range for each resistance, 13W to 18W for the 0.8 ohm coil and 10W to 15W for the 1.0 ohm coil, and describes the 0.8 ohm coil as a DTL option and the 1.0 ohm coil as an MTL option.
The price is AED 50 per pack of four, which works out to AED 12.50 a coil. That is a listing figure and stock or price can change, so check the product page before you order. The main limitation is also the main selling point: these coils are made for one pod system and the listing says they are not for other devices.
Our verdict, from the listing alone: a sensible, clearly specified refill for existing Caliburn G owners, with a choice of draw style in one product. It is not a good buy if you own a different Uwell device, because fit is the one thing you cannot work around. Check your device name against the compatibility line before you add it to your basket.
Specifications and pack options
The product listing gives these key specifications. The brand is Uwell and the category is Pods/Coils. Coil resistance is mesh 0.8 ohm or mesh 1.0 ohm. The wattage range is 13W to 18W for the 0.8 ohm coil and 10W to 15W for the 1.0 ohm coil. The coil type is single mesh. The draw type is DTL for the 0.8 ohm coil and MTL for the 1.0 ohm coil. The connection is a friction fit to Uwell Caliburn G pods. The pack quantity is four coils per pack, and the compatibility is the Uwell Caliburn G pod system.
The price on our shop is AED 50 at the time of writing, and both resistance options are listed at that same price. You pick the resistance on the product page, and the listing offers no other pack sizes. The listing describes the airflow as switchable and mentions that installation is quick and secure. It does not publish a coil life figure, a coil material or a liquid capacity, so we do not state any of them.
Because the listing is silent on coil life, any claim of a set number of days would be a guess. The listing itself says to replace a coil when flavour fades or vapour drops, and that is the rule we follow here. Two packs, which is eight coils, come to AED 100, which also happens to be our minimum order value. You can see every product from the brand on the Uwell brand page and the full replacement coils range.
What sets the 0.8 ohm and 1.0 ohm coils apart
Resistance is the number that shapes the draw. In general, a lower resistance coil lets more current through at a given power, heats up faster and produces more vapour, while a higher resistance coil draws less power and gives a tighter, cooler, more restrained draw. The listing follows that pattern: the 0.8 ohm coil has the higher wattage range and is labelled DTL, and the 1.0 ohm coil has the lower range and is labelled MTL.
The 0.8 ohm mesh coil
The 0.8 ohm coil is the listing choice for direct-to-lung vaping, running at 13W to 18W. Mesh coils spread the heating surface out, which is why makers describe them as helping flavour and vapour production, although that is a claim from the listing and not something we measured. Expect it to use the battery faster than the 1.0 ohm option, because it runs at a higher power range.
The 1.0 ohm mesh coil
The 1.0 ohm coil is the listing choice for mouth-to-lung vaping, running at 10W to 15W. Mouth-to-lung means drawing the vapour into the mouth first and then inhaling, which is how a cigarette is drawn, and the listing says this coil closely mimics a traditional cigarette draw. It runs at lower power, so you would normally expect it to be gentler on the battery, though the listing gives no battery figures.
How to pick, fit and prime the right coil
Pick by draw style first. If you like a looser, more open draw and a bigger cloud, the 0.8 ohm coil is the one the listing points to. If you prefer a tight draw that feels like a cigarette, the 1.0 ohm coil is the match. If you are unsure, remember that you can order the other resistance next time, because the pack is cheap enough to swap.
Match the power setting to the coil. Stay inside the range the listing gives, 13W to 18W for 0.8 ohm and 10W to 15W for 1.0 ohm, and start at the lower end. Running a coil above its range can burn the cotton and shorten its life, and that is true of any coil. The liquid you use is your own choice, and it should be one that is legal and suitable for adults in the UAE.
How to fit and prime a new coil
The listing describes five steps. Remove the pod from your Caliburn G device, pull the used coil out of the base of the pod, press a new coil in using the friction fit, fill the pod and let the coil prime with e-liquid for 2 to 3 minutes, then reattach the pod to the device. Priming matters because a dry cotton wick gives a burnt taste. Keep the liquid above the minimum line so the wicking ports stay covered.
A few habits help any coil last. Avoid chain vaping, because a coil that never gets time to re-wet can scorch. Choose a thinner, cleaner liquid if you can, because very sweet or dark liquids tend to leave residue on the heating element. Check that the coil is pressed fully into the pod base so the seal holds and the pod does not leak. None of this is specific to the Caliburn G, and the listing gives no maintenance schedule, so treat it as general good practice and replace the coil when the flavour fades.
Compatibility and how it compares with other Uwell coils
The listing is firm on compatibility: these coils are for the Uwell Caliburn G pod system and cannot be used with other devices. Do not assume they fit other Caliburn pods, and pay particular attention to the model name on the pack of your own device. If your device is a different Caliburn model, look for the coil pack that is listed for that model instead.
The table puts this pack next to three other Uwell coil packs on our shop, using only listing figures. Note that the power ranges and fit styles differ, which is why a coil cannot be moved from one Uwell pod system to another.
| Coil pack | Resistance options | Power range | Fit | Pack | Price (AED) |
|---|---|---|---|---|---|
| Uwell Caliburn G coils (this review) | 0.8 ohm mesh (DTL) / 1.0 ohm mesh (MTL) | 13-18W / 10-15W | Friction fit to Caliburn G pods | 4 coils | 50 |
| Uwell Aeglos coils | 0.23 ohm UN2 mesh / 0.8 ohm regular | 40-45W / 20-23W | Press-fit | 4 coils | 45 |
| Uwell Aeglos P1 coils | 0.2 ohm UN2 Meshed-H / 0.6 ohm UN2 Meshed-H | 45-52W / 23-27W | Plug-in | 4 coils | 45 |
| Uwell PA coils | 0.3 ohm UN2 Meshed-H / 0.8 ohm UN2 Meshed-H | 25-35W / 15-18W | Press-to-fit / plug-in | 4 coils | 45 |
Reading across the rows, this is the only pack in the table that lists a friction fit, and its power range is the lowest of the four, topping out at 18W. The Aeglos coils run up to 45W, and the Aeglos P1 packs go up to 52W, so they belong to a different class of device. The PA pack sits in between at up to 35W. The practical lesson is that resistance and wattage must be read together, and that a pack should always be matched to the exact pod system named on its listing.
For help with the general rules of matching resistance to a device, read how to choose replacement coils and the pods and coils buying guide. If you also need spare pods for the same device, our Caliburn G empty pod cartridge review covers the matching pack.
UAE rules and safe use
Vaping products sold in the UAE are expected to meet UAE.S 5030:2018 and carry ECAS certification through the Ministry of Industry and Advanced Technology, so check the mark on any device or liquid you use with these coils. Start from the MoIAT website for the current position, because rules on nicotine strength, flavours and device size have changed over time and we cannot confirm every detail on this page.
Coils themselves do not contain nicotine, but they are used with e-liquids that do, and nicotine is addictive. We sell to adults aged 21 and over only, UAE law may set a higher limit, and we may ask for an Emirates ID or passport on delivery. Read our age verification page for how that works. The NHS says vaping is less harmful than smoking but not risk-free, and the official Uwell website is the place to confirm device details.
Keep coils, pods and liquids away from children and pets, and dispose of used coils with care. This post is general product information, not medical or legal advice, and we make no claim that vaping helps anyone quit smoking.
Price, delivery and final verdict
The Uwell Caliburn G coils review comes down to a clearly specified pack at AED 50 for four coils, with a choice of draw style and a fit that is limited to one pod system. Prices and stock can change, so check the Caliburn G coil listing for the current figure.
| Pros | Cons |
|---|---|
| Two resistances, 0.8 ohm for DTL and 1.0 ohm for MTL | Fits the Caliburn G pod system only |
| Four coils in every pack | Narrow power range, 10W to 18W overall |
| Friction fit, quick to change | No coil life figure on the listing |
| Listed power ranges are clear for each resistance | Needs 2 to 3 minutes of priming before use |
| AED 50 for the pack, with both options at one price | You must choose one resistance per pack |
Our verdict: buy the 0.8 ohm pack if you own a Caliburn G and want a looser DTL draw, and the 1.0 ohm pack if you want a tight MTL draw. Do not buy either if your device is a different model. The missing coil life figure is the one gap to keep in mind, so judge by flavour and vapour, as the listing advises.
One more point for first-time buyers of this pack: the product is a variation, so you must pick 0.8 ohm or 1.0 ohm before you can add it to your basket. Both cost AED 50, so the decision is purely about draw style. If you are not sure, think about how you vape today. A person who already takes a long, open draw will find the 0.8 ohm coil closer to what they know, and a person who takes short, gentle draws will find the 1.0 ohm coil closer. This Uwell Caliburn G coils review cannot predict your own preference, which is why we point you back to the listing figures.
How to order in Dubai
Orders in Dubai, Sharjah and Ajman are delivered in about two hours, from 10am to 11pm, seven days a week, and you can pay by cash, card or bank transfer. Other emirates are served by courier within 24 hours, Monday to Saturday, with cash on delivery or bank transfer. Delivery is free above AED 350 and costs a flat AED 30 below that, so an order of exactly AED 350 pays AED 30. The minimum order is AED 100, which means one pack at AED 50 needs a second item to check out. See vape delivery in Dubai and the delivery and payment terms.
Related reviews: UN2 coils for the Uwell Aeglos | Uwell Aeglos P1 replacement coils | Uwell PA replacement coils.
Sources: official Uwell website; NHS guidance on using e-cigarettes; MoIAT; specifications from the product listing.
Keep exploring: pods and coils buying guide | vape delivery in Dubai | delivery and payment terms | age verification.
Written by Ismail Hossain. Read how we test vapes and our editorial policy.
