Overview
This GEEKVAPE M Series Coils review looks at a five-coil replacement pack that comes in four configurations: single 0.14Ω, dual 0.3Ω, triple 0.2Ω and quadra 0.15Ω. It is a specification-based review. We have not run these coils ourselves, so everything below comes from the product listing and from general coil knowledge that applies to any direct-to-lung (DTL) coil.
The listing describes the range as aimed at flavour clarity and vapour production, and it states that the coils are compatible with supported Geekvape devices. That last phrase matters, because a replacement coil is only useful if it fits the tank you already own. Read the compatibility section before you add anything to your basket.
The pack costs AED 50 for the single 0.14Ω option and AED 65 for the dual, triple and quadra options at the time of writing. Written by Ismail Hossain as a specification-based review; see our editorial policy for how we write. Our shop sells to adults aged 21 and over only, and UAE law may set a higher age limit.
GEEKVAPE M Series Coils review: specifications at a glance
The listing keeps its specification list short and clear. The brand is GEEKVAPE, the product type is filed under pods and coils, and each pack holds five coils. The vaping style is direct-to-lung, and the stated performance focus is flavour clarity and vapour production. Compatibility is given as supported Geekvape devices, with no individual tank named on the listing.
Four coil variants are offered: a single coil at 0.14Ω, a dual coil at 0.3Ω, a triple coil at 0.2Ω and a quadra coil at 0.15Ω. The listing spells the third one as Trible, but it is the triple-coil option. You pick the variant on the product page, and the pack size stays at five coils whichever one you choose.
What the listing does not give is just as useful to know. It publishes no wattage range for each variant, no coil material, no wicking detail and no lifespan figure. Because we do not invent numbers, this review does not quote any of them. If you need a recommended power range, check the manufacturer information on the official GeekVape website for your own tank before you fit a coil.
You can browse the wider GEEKVAPE range and the pods and coils category if you want to see what else sits alongside this pack. The product page for this item is GEEKVAPE M Series Coils.
The four coil variants explained
Resistance is measured in ohms, and for a given battery output a lower number lets more current flow through the coil. In practice that usually means a warmer, higher-powered draw, which is why low-resistance coils are normally paired with devices that can supply a lot of power. All four M Series options sit well below 1Ω, so they belong to the sub-ohm family rather than the tighter, higher-resistance coils used in small pod kits.
The single coil at 0.14Ω is the lowest resistance on the list and the only one priced at AED 50. A single coil has one heating element, so it is the simplest build on offer. Choose it if your device and settings already suit a very low resistance, and if you want the cheapest entry point into the range.
The quadra coil at 0.15Ω sits next to it on resistance but uses four coil elements. More elements spread the heating across a larger area, which is the usual reason people choose multi-coil builds. The triple coil at 0.2Ω follows the same logic with three elements and slightly higher resistance.
The dual coil at 0.3Ω has the highest resistance of the four. Higher resistance tends to be easier on battery and e-liquid, so it is the natural pick for anyone who wants a less demanding setup. Remember that this is general coil behaviour and not a test result for this pack. The three multi-element variants cost AED 65, so the price difference is AED 15 over the single option.
Compatibility and fit
Compatibility is the one point a buyer cannot guess. The listing says the coils are compatible with supported Geekvape devices, and its cons note that the coils are compatible only with specific Geekvape models. Neither line names the exact tank, so we cannot tell you which device the coils fit, and we will not guess from a coil name.
A quick way to settle it is to look at the coil you are replacing. Most GeekVape coils carry a series letter and a resistance value printed on the side or base. If the letter on your old coil is an M, you are looking at the right family. If it shows something else, such as Z, G or P, you need a different pack, and our reviews of the GeekVape Z series coils, GeekVape G series coils and GeekVape P series coils cover those.
The guide to choosing replacement coils walks through matching a coil to a tank step by step, and the pods and coils buying guide explains the difference between pods, cartridges and screw-in or push-in coils. If you are still unsure after reading both, contact the shop with your device name before you order, because a wrong-fit coil is the most common avoidable mistake with replacement packs.
If the pack matches your tank, the GEEKVAPE M Series Coils review comes down to choosing a resistance that suits your power settings. Do not mix coils between families. Even when a coil physically seats in a tank, the wrong series can sit at the wrong height or draw the wrong current, which can cause dry hits or leaks. Stick to the series your device manufacturer names.
Direct-to-lung use and e-liquid choice
The listing says these coils are designed for direct-to-lung vaping. In DTL you draw the vapour straight into your lungs with a long, relaxed breath, rather than holding it in your mouth first. That style normally pairs with open airflow, lower-resistance coils and thicker e-liquid, which matches the resistance values on this pack. The listing also notes the coils are designed primarily for DTL, so they are not the natural choice if you prefer a tight mouth-to-lung draw.
General coil advice applies. Prime a new coil by dripping e-liquid onto the cotton ports and letting it soak for several minutes before you vape, which is also what the listing recommends. This avoids dry hits that can scorch the wick and shorten the coil. Start at the low end of your device’s power range and increase gradually, rather than starting at full power.
E-liquid with a higher VG share is commonly used with low-resistance coils because it is thicker and produces denser vapour, but the listing gives no VG recommendation, so follow the guidance for your tank. Sweet, heavily flavoured liquids can leave residue on a coil faster than lighter ones, which is a general rule rather than something we measured on this pack.
Heat is a practical issue in the UAE. Leaving a tank in a hot car thins e-liquid and can cause leaking, so keep your device out of direct sun. Our guide to changing a vape coil and the coil resistance guide cover fitting and resistance in more detail, and the article on mesh versus ceramic coils explains the materials you will meet elsewhere.
How it compares with other GeekVape coils
The table below sets the M Series beside three other GeekVape coil listings from our shop. Every figure comes from the live product listings. We left out any row we could not verify, so some columns are shorter than you might expect, and where a listing is silent we say so rather than fill the gap.
| Coil | Resistances | Style or build | Compatibility (per listing) | Price |
|---|---|---|---|---|
| GEEKVAPE M Series Coils (this review) | 0.14Ω single, 0.15Ω quadra, 0.2Ω triple, 0.3Ω dual | Direct-to-lung | Supported Geekvape devices (not named) | From AED 50 |
| GEEKVAPE Z Series Coils | 0.15Ω, 0.2Ω, 0.25Ω, 0.4Ω | Direct-to-lung, mesh coils | Z Series supported tanks and devices | AED 50 |
| GEEKVAPE G Series Coils | 0.6Ω, 0.8Ω, 1.0Ω, 1.2STΩ, 1.8Ω | Mesh Kanthal, high-PG e-liquid | Replacement coil only; device not named | AED 50 |
| GEEKVAPE Super Mesh X1/X2 | 0.2Ω (X1), 0.4Ω (X2) | Mesh KA1, 5 coils per pack | Shield, Aero and Cerberus tanks | AED 50 |
The main takeaway is that the M Series covers a much lower resistance band than the G Series, which runs from 0.6Ω up to 1.8Ω and includes tighter options. The Z Series sits closest, with resistances from 0.15Ω to 0.4Ω for supported Z tanks. The Super Mesh listing names its tanks (Shield, Aero and Cerberus), which is more compatibility detail than the M Series listing gives. All four are priced from AED 50, so price alone will not decide it. Fit will.
Pros and cons
These points come from the listing and from general coil behaviour. They are not hands-on findings.
| Pros | Cons |
|---|---|
| Four resistances (0.14, 0.15, 0.2 and 0.3Ω) in one range | Compatible only with specific Geekvape models |
| Single, dual, triple and quadra coil builds to choose from | Listing does not name the exact tank it fits |
| Five coils per pack, from AED 50 | Designed primarily for direct-to-lung, not tight mouth-to-lung draws |
| Listing states a focus on flavour clarity and vapour production | No wattage range, material or lifespan figure published |
| Priming guidance given on the listing | A single pack falls below the AED 100 minimum order |
Our verdict in this GEEKVAPE M Series Coils review is conditional: the pack makes sense only for a vaper who already owns a compatible Geekvape device and wants a low-resistance DTL coil. Weigh the two columns against your own device. If you already know your tank takes M Series coils, the range of four resistances and the five-coil pack are real advantages. If you are unsure of the fit, the compatibility wording is the main thing to resolve first.
Price, ordering and delivery
The single 0.14Ω pack is AED 50 and the dual, triple and quadra packs are AED 65 at the time of writing. Prices and stock can change, so check the product page before you order. Because every option is a five-coil pack, the cost per coil is easy to work out: AED 10 for the single and AED 13 for the others.
Our minimum order is AED 100, so a single AED 50 or AED 65 pack on its own falls below it. Pair the coils with a second item, or with a second pack of another resistance, to reach the minimum. Orders above AED 350 ship free; an order of exactly AED 350 pays the flat AED 30 fee, and so does any order below that figure.
In Dubai, Sharjah and Ajman, orders normally arrive in about two hours between 10am and 11pm, seven days a week, and you can pay by cash, card or bank transfer. Other emirates are served by courier within 24 hours, Monday to Saturday, with cash on delivery or bank transfer. The full terms are on the delivery and payment page and the vape delivery in Dubai page.
UAE rules and age limit
Vaping products sold in the UAE are expected to meet UAE.S 5030:2018 and carry ECAS certification through MoIAT. You can read the standard itself in the WHO-hosted copy of the UAE.S 5030:2018 standard (MoIAT), and general information is on the MoIAT website. Check the mark on the packaging when your order arrives.
Our shop serves adults aged 21 and over only, and UAE law may set a higher age limit, so check the current rules that apply to you. We may ask for an Emirates ID or passport on delivery; see the age verification page for what to expect. For official public guidance on tobacco and nicotine products, the UAE government publishes a page on tobacco and smoking.
Vaping products contain nicotine, which is addictive, and the World Health Organization publishes general health information on tobacco and nicotine. Keep coils, tanks and e-liquid away from children and pets.
FAQ
How many coils come in a GEEKVAPE M Series pack?
Each pack contains five replacement coils, whichever of the four variants you choose. The price on the listing is AED 50 for the single 0.14Ω option and AED 65 for the dual, triple and quadra options, so the cost per coil is AED 10 or AED 13.
Which resistances does the M Series offer?
The listing offers a single coil at 0.14Ω, a dual coil at 0.3Ω, a triple coil at 0.2Ω and a quadra coil at 0.15Ω. All four are low-resistance options aimed at direct-to-lung vaping, and the listing states a focus on flavour clarity and vapour production.
Which device do the coils fit?
The listing only says they are compatible with supported Geekvape devices and notes they suit specific Geekvape models. It does not name a tank, so check the series letter on the coil you are replacing, or contact the shop with your device name, before ordering.
Are these coils suitable for mouth-to-lung vaping?
The listing describes them as designed primarily for direct-to-lung vaping. All four resistances are low, so they are not the usual choice for a tight mouth-to-lung draw. For that style, look at higher-resistance coils such as those covered in our G series coils review.
More GeekVape reviews: Aegis B series coils, Sonder U kit and Sonder Q kit.
